MMA/TIG Welding Machine -- SAPPHIRE-500
Diode based power sources are the basic type arc welding power source used for MMA/TIG applications. Current control is achieved through saturable core reactor. Very reliable power source but not recommended for radiographic welding application as there is no dependable feedback for maintaining the output current constant due to fluctuation of input supply or change in load. Power factor is poor for these power sources.
Special Features:
- Unique design.
- Heavy duty, designed for project site applications.
- Minimum current starts from 10 amperes compared to others’ 30 amperes. This allows thin sheet TIG welding..
- Light weight & compact remote control pendant.
- Almost No maintenance machine.
Advantages:
- Heavy duty rugged machine.
- Simple to use.
- Very easy to maintain.
Technical Specifications of SAPPHIRE-500:
- Input Supply : 3 Phase; 400 Volts+/- 10%; 50/60 Hz
- Current Control Range : 30 Ampere to 500 Ampere.
- Low : 30 Ampere to 130 Ampere
- Medium : 100 Ampere to 300 Ampere
- High : 230 Ampere to 500 Ampere
- Open Circuit Voltage : 75-85 VDC
- Input KVA at 60% duty cycle 400 Amps : 33.8
- Input KVA at 100% duty cycle 300 Amps : 25.6
- Insulation : Class ‘H’
- Cooling : Fan Cooled
- Dimension (L X W X H) : 690 X 630 X 730 mm
- Weight : 260 Kgs
Standard Scope of Supply:
- Uniquely designed Arc welding rectifier Model Sapphire - 500 with silicon controlled, step less current control in a given range ( low, medium, high) using a small pot, high speed cooling fan, powder coated body mounted on four wheel having current control range 30 to 500 Amperes.
Optional Accessories:
- Input cable.
- TIG Accessories (HF Unit, water cooling unit, Gas cooled TIG Welding torch, water cooled TIG Welding torch).
- Safety Wear – Shoes, Goggles.
- Remote control unit.
