Plasma Welding Machine - PW-100

  1. Home
  2. Plasma Welding Machine - PW-100

Plasma Welding Machine - PW-100

Plasma Arc Welding - PW-100:

Plasma arc welding (PAW) is an arc welding process, where a coalescence is produced by the heat generated from a constricted arc formed between a tungsten electrode and water-cooled (constricting) nozzle (non-transferred arc) or between a tungsten electrode and the job (transferred arc). The process uses two inert gases, one forms the arc plasma and the second shields the arc plasma.

Special Features:

  • Inverter based DC welding machine capable for welding and brazing.
  • Programmable machine having provision for setting all parameters up to 8 jobs.
  • Power source having cooling unit and gas cylinder mounted on one trolley.
  • Precise, highly stable plasma arc for targeted and concentrated heat generation.
  • Welding thickness – Machine capable to weld a wide range of very thin sheets ranging from 100 microns to 1 mm.
  • Programmable machine – Machines are fully programmable and capable to save all parameters for 8 jobs.
  • Pilot Arc – Pilot arcing system is built in.
  • Arc stability – PLC based closed loop, capable for perfectly stable arc.
  • Pulsing facility – Pulsing facility available for perfect and smooth welding.

Technical Specification:

  • Input Supply : 400 VDC -25%, +20%/ 50-60Hz / 3 Ph
  • Input KVA : 3.5
  • Input KW : 3
  • Power Factor : 0.95
  • Max Current (A) : 100
  • Current Range (A) : 1 – 100
  • Pilot Arc Current : 1 – 20 Amps
  • Current Control : Stepless
  • Duty Cycle (%) : 100
  • Display (A/V) : Digital
  • Mains Fuse : 3 Ph, 16 Amps
  • Base Current (A) : 1 – 100
  • Peak Current (A) : 1 – 100
  • Pulse Frequency (Hz) : 1 – 10
  • Pulse Duty (%) : 10 – 90
  • Up Slope (Sec) : 0 – 10
  • Down Slope (Sec) : 0 – 10
  • Pre Flow (Sec) : 0 – 10
  • Post Flow (Sec) : 0 – 10
  • High Frequency : Electronic
  • Current (A) : 2
  • Trip : Auto
  • Pre Settable Current : Yes
  • Class of Insulation : H
  • Power Source : Water Cooled
  • Torch Cooling : Water Cooled

Standard Scope Of Supply:

  • Inverter based water cooled Micro Plasma welding machine with water cooled micro plasma hand torch.
  • Contact tips.
  • Nozzle.
  • Ceramic Sleeves.
  • Argon regulator and Flow meter.
  • Gas Hose pipe.

Optional Accessories –

  • Gas control panel.
  • TIG Torch.

Spares & Consumables available for the machine:

  • Water cooled plasma torch.
  • Contact tip.
  • Nozzle.
  • Ceramic Sleeve.

Downloads

Micro Plasma Welding Machine - MPW

Photos & Videos

Get a Quote Now

Plasma Cutting Machines