Plasma Cutting Machine -- KALI-F Series
Heavy Duty Air Plasma Cutting System:
Diode is the simplest semiconductor device and it consists of two semiconductor layers (one P-type and one N-type) connected to each other. Therefore diode is a PN junction.
Diode has two terminals known as the Anode (the P-type layer) and Cathode (the N-type layer). Diode allows current flows through it only in one direction that is anode to cathode. This direction of current is marked on its symbol as an arrow head.
Since diode restricts the current to only one direction, it can be used as a rectifier. The full bridge rectifier circuit which is made of four diodes can rectify an alternative current (AC) to a direct current (DC).
With the help of oil free compressed air delivery at 5.5 bar & electricity, cuts all metals like Stainless Steel, Mild Steel, Copper Brass, Aluminium, Inconel, Monel, Titanium, Nickel, Chorme, Bronze, Galvanised Steel, Heated Steel, Wear Plates, Castings.
Special Features:
- 100% Indian Product.
- Safety interlocks to protect the operator & the machine.
- Designed for continuous operation.
- Compatible for CNC profile cutting machine.
- Best Quality / Input Power Ratio.
- Minimum post cutting operations.
- Unique torch design for ease in operation.
- Least maintenance cost.
- Highest consumable life.
- Fixed or step controlled power source.
- Output current for the machine is fixed and does not change.
- Cutting speed requires adjustment depending upon the thickness.
- Suitable for application where cutting thickness do not vary much.
- Most reliable , No electronics, Least maintenance cost.
- Models with 30 amps output to 1000 amps output.
Usage:
- As SS cannot be cut with oxy fuel, Plasma is a ‘Must’ for SS cutting. Though, MS can be cut with oxy fuel, Plasma is far more economical than oxy fuel, if the job thickness is below 25 mm. So, plasma cutting is becoming very popular in India.
Models
KALI-30F
Diode Based Plasma Cutting Machine suitable for upto 8mm fine cut and 16mm severance cut of any electro conductive metal plate.
KALI-MF
Diode Based Plasma Cutting Machine suitable for upto 16mm fine cut and 32mm severance cut of any electro conductive metal plate.
KALI-80F
Diode Based Plasma Cutting Machine suitable for upto 25mm fine cut and 40mm severance cut of any electro conductive metal plate.
KALI-100F
Diode Based Plasma Cutting Machine suitable for upto 32mm fine cut and 50mm severance cut of any electro conductive metal plate.
KALI-150F
Diode Based Plasma Cutting Machine suitable for upto 50mm fine cut and 75mm severance cut of any electro conductive metal plate.
KALI-200F
Diode Based Plasma Cutting Machine suitable for upto 75mm fine cut and 100mm severance cut of any electro conductive metal plate.
KALI-400F
Diode Based Plasma Cutting Machine suitable for upto 100mm fine cut and 140mm severance cut of any electro conductive metal plate.
KALI-500F
Diode Based Plasma Cutting Machine suitable for upto 125mm fine cut and 175mm severance cut of any electro conductive metal plate.
Standard Scope of Supply:
- Power Source.
- Water/Air Cooled Hand Torch with 6meters cable length.
- Ground Cable set with 6meters length.
- Front cap - 1 number.
- Electrode & Nozzles & 'O' Ring- 5 Sets.
Industres Served:
- Machine manufacturing.
- Automobile Manufacturing.
- Ship Building.
- Auto component manufacturing.
- Boiler manufacturing.
- Heat exchanger manufacturing.
- Infrastructure.
- Vessel Manufacturing.
- Fabrication.
Spares:
- Hand Torch Assembly.
- Front Cap.
- Contact Tube
- Electrode Holder.
- Nozzle Holder.
Consumables:
Spares & Consumables available for the machines:
- Nozzle.
- Electrode.
Optional Accessories:
- Air Cooled Machine Torch with 6mtrs length.
- Trolly with 1.8meters steel track & circle cutting attachment.
- Air Compressor.
- Gouging Torch.
- Extra Cable Length.
